Specialty Screwdrivers

For the first time ever, I used one of the weird screwdrivers that knock around at the bottom of your toolbox, or live at the back of your junk drawer.

I had to re-install some recessed can lights. The can part of the lighting assembly limited the length of any screwdriver I could use. A 6-in-1 combination screwdriver is the first screwdriver I reach for, and usually the only one I use. Unfortunately, it was too long to fit this time.

short conventional Phillips head screwdriver

Luckily I found Ol’ Stubby lounging amongst the odd spare screws, wire nuts and lint in the bottom of my toolbox.

Ol’ Stubby actually worked, allowing straight in torquing of the Phillips head screws that hold the can in the hole in the ceiling. The fact that I was able to find a short screwdriver and get the cans installed does not remediate the insane mechanical choices of lighting designers. It seems that hiding any fasteners or power cables is their primary concern.

Other Weird Screwdrivers

I could have used this “fingerwheel” screwdriver, had I not found Ol’ Stubby first.

fingerwheel screwdriver

The fingerwheel has a hexagonal socket that receives standard screwdriver bits, and a square socket that holds a square-shanked socket wrench extension, so it could work as a fingerwheel socket wrench too. I impulse bought this at the local Ace Hardware store checkout counter. I don’t believe I’ve ever used it.

Further afield, I also found an offset screwdriver in the dark corners of my toolbox.

offset screwdriver

I recall using an offset screwdriver once. Once. I guess I could have used an offset screwdriver instead of Ol’ Stubby inside the light fixture can, but that would have made holding the can in the proper position, putting the screw in the hole in the can, and setting the screwdriver into the screw’s head quite a bit more difficult.

Sometimes having the specialty tool makes a job a lot easier. For example, having an electrician’s wire stripper makes replacing a light switch or a socket into a task, rather than a patience-testing ordeal. I’m not sure specialty screwdrivers fit in that category. They exist mainly to trigger impulse buys and to fill out blister-packs of screwdriver sets.